Sintered NdFeB Permanent Ring Shape N42 Neodymium Magnets
Neodymium magnets are manufactured on the basis of Nd-Fe-B alloys and sintered Neodymium magnets have the highest (BH)max value among all of commercially available permanent magnets. Neodymium ring magnets are circular in shape with a concentric hole inside it. Magnet ring can be divided to pure ring or countersunk ring based on the detailed shape of the inner hole. Neodymium ring magnet should be measured by outer diameter (O.D.), inner diameter (I.D.), and thickness (T). Similar to Neodymium disc magnet, ring shaped magnet can be magnetized with its N pole and S pole opposite flat end surfaces or diametrically magnetized so as to the N pole is on one curved side and the S pole is on opposite curved side. Besides the conventional axial magnetized or diametrically magnetized magnets, radially oriented ring magnet is also available in SDM. In addition, Neodymium magnets are easily corrode under humid condition and are necessary to cover with a protective coating.
1. Coatings of Neodymium Magnets
2. Magnetic Properties of Sintered Neodymium Magnet
Sintered NdFeB Magnet |
Grade |
Residual Induction (Br) |
Coercive Force (Hcb) |
Intrinsic Coercive Force (Hcj) |
Max Energy Product (BH)max |
Max Working Temp. |
T |
kGs |
kA/m |
kOe |
kA/m |
kOe |
Kj/m³ |
MGOe |
(°C) |
N35 |
1.17-1.22 |
11.7-12.2 |
≥868 |
≥10.9 |
≥955 |
≥12 |
263-287 |
33-36 |
80 |
N38 |
1.22-1.25 |
12.2-12.5 |
≥899 |
≥11.3 |
≥955 |
≥12 |
287-310 |
36-39 |
80 |
N40 |
1.25-1.28 |
12.5-12.8 |
≥907 |
≥11.4 |
≥955 |
≥12 |
302-326 |
38-41 |
80 |
N42 |
1.28-1.32 |
12.8-13.2 |
≥915 |
≥11.5 |
≥955 |
≥12 |
318-342 |
40-43 |
80 |
N45 |
1.32-1.38 |
13.2-13.8 |
≥923 |
≥11.6 |
≥955 |
≥12 |
342-366 |
43-46 |
80 |
N48 |
1.38-1.42 |
13.8-14.2 |
≥923 |
≥11.6 |
≥955 |
≥12 |
366-390 |
46-49 |
80 |
N50 |
1.40-1.45 |
14.0-14.5 |
≥796 |
≥10 |
≥876 |
≥11 |
374-406 |
47-51 |
60 |
N52 |
1.43-1.48 |
14.3-14.8 |
≥796 |
≥10 |
≥876 |
≥11 |
390-422 |
49-53 |
60 |
N35M |
1.17-1.22 |
11.7-12.2 |
≥868 |
≥10.9 |
≥1114 |
≥14 |
263-287 |
33-36 |
100 |
N38M |
1.22-1.25 |
12.2-12.5 |
≥899 |
≥11.3 |
≥1114 |
≥14 |
287-310 |
36-39 |
100 |
N40M |
1.25-1.28 |
12.5-12.8 |
≥923 |
≥11.6 |
≥1114 |
≥14 |
302-326 |
38-41 |
100 |
N42M |
1.28-1.32 |
12.8-13.2 |
≥955 |
≥12 |
≥1114 |
≥14 |
318-342 |
40-43 |
100 |
N45M |
1.32-1.38 |
13.2-13.8 |
≥955 |
≥12.5 |
≥1114 |
≥14 |
342-366 |
43-46 |
100 |
N48M |
1.37-1.43 |
13.7-14.3 |
≥1027 |
≥12.9 |
≥1114 |
≥14 |
366-390 |
46-49 |
100 |
N50M |
1.40-1.45 |
14.0-14.5 |
≥1033 |
≥13 |
≥1114 |
≥14 |
382-406 |
48-51 |
100 |
N35H |
1.17-1.22 |
11.7-12.2 |
≥868 |
≥10.9 |
≥1353 |
≥17 |
263-287 |
33-36 |
120 |
N38H |
1.22-1.25 |
12.2-12.5 |
≥899 |
≥11.3 |
≥1353 |
≥ 17 |
287-310 |
36-39 |
120 |
N40H |
1.25-1.28 |
12.5-12.8 |
≥923 |
≥11.6 |
≥1353 |
≥17 |
302-326 |
38-41 |
120 |
N42H |
1.28-1.32 |
12.8-13.2 |
≥955 |
≥12 |
≥1353 |
≥17 |
318-342 |
40-43 |
120 |
N45H |
1.32-1.36 |
13.2-13.6 |
≥963 |
≥12.1 |
≥1353 |
≥ 17 |
326-358 |
43-46 |
120 |
N48H |
1.37-1.43 |
13.7-14.3 |
≥995 |
≥12.5 |
≥1353 |
≥17 |
366-390 |
46-49 |
120 |
N35SH |
1.17-1.22 |
11.7-12.2 |
≥876 |
≥11 |
≥1592 |
≥20 |
263-287 |
33-36 |
150 |
N38SH |
1.22-1.25 |
12.2-12.5 |
≥907 |
≥11.4 |
≥1592 |
≥20 |
287-310 |
36-39 |
150 |
N40SH |
1.25-1.28 |
12.5-12.8 |
≥939 |
≥11.8 |
≥1592 |
≥20 |
302-326 |
38-41 |
150 |
N42SH |
1.28-1.32 |
12.8-13.2 |
≥987 |
≥12.4 |
≥1592 |
≥20 |
318-342 |
40-43 |
150 |
N45SH |
1.32-1.38 |
13.2-13.8 |
≥1003 |
≥12.6 |
≥1592 |
≥20 |
342-366 |
43-46 |
150 |
N28UH |
1.04-108 |
10.4-10.8 |
≥764 |
≥9.6 |
≥1990 |
≥25 |
207-231 |
26-29 |
180 |
N30UH |
1.08-1.13 |
10.8-11.3 |
≥812 |
≥10.2 |
≥1990 |
≥25 |
223-247 |
28-31 |
180 |
N33UH |
1.13-1.17 |
11.3-11.7 |
≥852 |
≥10.7 |
≥1990 |
≥25 |
247-271 |
31-34 |
180 |
N35UH |
1.17-1.22 |
11.7-12.2 |
≥860 |
≥10.8 |
≥1990 |
≥25 |
263-287 |
33-36 |
180 |
N38UH |
1.22-1.25 |
12.2-12.5 |
≥876 |
≥11 |
≥1990 |
≥25 |
287-310 |
36-39 |
180 |
N40UH |
1.25-1.28 |
12.5-12.8 |
≥899 |
≥11.3 |
≥1990 |
≥25 |
302-326 |
38-41 |
180 |
N42UH |
1.28-1.32 |
12.8-13.2 |
≥899 |
≥11.3 |
≥1990 |
≥25 |
318-342 |
40-43 |
180 |
N28EH |
1.04-1.08 |
10.4-10.8 |
≥780 |
≥9.8 |
≥2388 |
≥30 |
207-231 |
26-29 |
200 |
N30EH |
1.08-1.13 |
10.8-11.3 |
≥812 |
≥10.2 |
≥2388 |
≥30 |
223-247 |
28-31 |
200 |
N33EH |
1.13-1.17 |
11.3-11.7 |
≥836 |
≥10.5 |
≥2388 |
≥30 |
247-271 |
31-34 |
200 |
N35EH |
1.17-1.22 |
11.7-12.2 |
≥876 |
≥11 |
≥2388 |
≥30 |
263-287 |
33-36 |
200 |
N38EH |
1.22-1.25 |
12.2-12.5 |
≥899 |
≥11.3 |
≥2388 |
≥30 |
287-310 |
36-39 |
200 |
N40EH |
1.25-1.28 |
12.5-12.8 |
≥899 |
≥11.3 |
≥2388 |
≥30 |
302-326 |
38-41 |
200 |
N28AH |
1.04-1.08 |
10.4-10.8 |
≥787 |
≥9.9 |
≥2624 |
≥33 |
207-231 |
26-29 |
230 |
N30AH |
1.08-1.13 |
10.8-11.3 |
≥819 |
≥10.3 |
≥2624 |
≥33 |
223-247 |
28-31 |
230 |
N33AH |
1.13-1.17 |
11.3-11.7 |
≥843 |
≥10.6 |
≥2624 |
≥33 |
247-271 |
31-34 |
230 |
N35AH |
1.17-1.22 |
11.7-12.2 |
≥876 |
≥11 |
≥2624 |
≥33 |
263-287 |
33-36 |
230 |
N38AH |
1.22-1.25 |
12.2-12.5 |
≥899 |
≥11.3 |
≥2624 |
≥33 |
287-310 |
36-39 |
230 |
3.Manufacturing Process of Sintered Neodymium Magnet
4. Magnetization Direction Of Arc Magnet
5. Machining Process of Neodymium Countersunk Magnet
It is hard for sintered Neodymium magnet to directly achieve required shape and dimensional accuracy at one time due to the technical limitations of magnetic field orientation molding process, then machining process of Neodymium magnet blank is unavoidable. As a typical cermet material, sintered Neodymium magnet is considerable hard and brittle, therefore, there are merely cutting, drilling, and grinding can be served for its machining process among conventional machining technology. 4mm is commonly treated as the critical dimension of ring magnet's inner hole. It is necessary to select trepanning process when inner hole larger than 4mm. As the by-product in trepanning process, trepanned core can be utilized to manufacture other suitable magnet and thus significantly enhance material utilization ratio.
FAQ
1: How long will you give me the reply?
We will contact you in 12 hours as soon as we can.
2: Could I get samples?
Yes, we have materials in stock to help you to get the samples as soon as we can.
3: How about the quality of the magnets?
We have the certification of ISO, TS and ROSH, we could send the certification test of our company to you.
4: How is the price?
As we believe the quality is the most important, we will provide the best quality magnet we can with reasonable price.
5: Could you provide me the shortest lead time?
We have materials in our stock, if you really need, you can tell us and we will try our best to satisfy you.
6: Could I visit your factory?
Of course, if you need we will help you to visit our factory.
7: If I have paid, when will you help me to produce?
When we have received the money in our account, we will give you the receipt and arrange to produce immediately.